![]() Provide Isc (total amperage) on each string Electrical one-line and three-line diagrams (showing phases, neutral and ground).Cut sheets and mounting details for PV module and mounting system Roof framing plan showing type, spacing and span of framing members, location of solar array, mounting locations.Panels/modules on buildings with roof hips and valleys shall be located no closer than 18 inches to a hip or valley where panels are placed on both sides of hip or valley (IFC 605.11).Panels/modules shall be located in a manner that provides two, 3-foot-wide access pathways from the eave to the ridge on each roof slope (IFC 605.11).Panels/modules shall be located not less than 3 feet from the ridge in accordance with International Fire Code (IFC 605.11).Site plan and roof plan to show location of PV installation including distance from roof surface to top of panels, panel tilt angles, parapet heights and roof slope(s).Solar Photovoltaic (PV) Systems Plan Submittal Requirements Include distance from roof surface to top of panels, panel tilt angles, parapet heights and roof slope(s).Work not completed by an Arizona licensed contractor.The photovoltaic system is greater than 10,000 aggregate square feet.The photovoltaic system is not listed and labeled by a nationally recognized testing agency.If any of the following conditions apply, an electrical permit is required: Construction Forms, Guides & ChecklistsĪn electrical permit shall not be required for photovoltaic power systems that are listed and labeled by a nationally recognized testing agency, under 10,000 square feet, and installed by an Arizona licensed contractor.Cadence Community Plan (formerly Pacific Proving Grounds North).Historic Landmark Overlay Zoning Process. ![]() Historic District Overlay Zoning Process.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |